Different insoles are available for Protector Forest 2.1 GTX red-yellow to increase or reduce the volume in the shoe. For this purpose, we have developed a slightly thicker insole for narrow feet and a slightly thinner insole for wider feet.

Our Vario-Wide-Fit-System allows you to adjust the volume in the shoe.

The Protector Forest 2.1 GTX red-yellow has been tested according to the standard DGUV 112-191 (BGR 191) and is therefore approved for orthopaedic insoles.

This allows the Protector Forest 2.1 GTX red-yellow to be adapted even more optimally to the foot and to support its anatomical structure.

The Protector Forest 2.1 GTX red-yellow can be cared for quickly and easily. With colourless, grease-free shoe polish for suede and nubuck leather, which does not affect the breathability of the leather or the colour of the shoe, and a waterproofing agent, the shoe is cared for.

The uncomplicated Protector Forest 2.1 GTX red-yellow ensures long-lasting enjoyment of the shoe's quality.

The Protector Forest 2.1 GTX red-yellow is equipped with a cut protection. This means that you can safely work with chain saws that have a running speed of 24 m per second.

Focus one hundred percent on your job thanks to complete protection of the Protector Forest 2.1 GTX red-yellow.

Your Protector Forest 2.1 GTX red-yellow can be perfectly combined with the optionally available Grip + Spikes mounting set. The set consists of a two-part assembly spanner and ten small spikes. The metal spikes are screwed into the designated areas in the sole of the shoe and provide additional grip on tree trunks.

Get even more out of your Protector Forest 2.1 GTX red-yellow with the optional Grip + Spikes accessory.

You can now attach spikes to the new, extremely non-slip sole of the Protector Forest 2.1 GTX, for example to provide more grip on felled tree trunks. This is not possible with its predecessor Protector Forest. What’s more, the new Protector Forest 2.1 GTX has an all-round rubber edge strip which provides even more stability and protection against abrasion.

The Protector Forest 2.1 GTX gives you outstanding grip on any terrain.

You can find all the right spare parts for our shoes on our spare parts page.

We produce in a UK shoe size system. The distance between our half UK sizes is only a few millimetres. This makes it more likely to find exactly the right shoe length.

Half UK sizes differ in length by only a few millimetres.

You can simply wash the dirty shoes with water and a brush. Please do not dry the wet shoes (even if they are wet on the inside) on an open fire, a hot stove or a heater. This will change the shape of the shoe. Simply remove the footbed and stuff the shoes with newspaper or use a shoe tree. Then allow the shoes to air dry slowly. We recommend washing the footbed regularly at 30°. In general, it is best to remove the footbed from the shoes after every wear to ensure optimal re-drying.

Simply clean it with a brush and water and let it air dry.

From experience, the Protector Forest 2.1 GTX red-yellow is a normal size. We therefore recommend that you choose the usual size.

Experience has shown that the shoe fits normally.

HAIX shoes are 100% Made in Europe. For us, this is not just lip service, but lived practice. When it says "Made in Europe" on a HAIX shoe, we assure you that it was made exclusively at our production sites in Mainburg and Mala Subotica, Croatia. Both plants are among the most modern shoe manufacturing facilities in the world.

By the way: "Made in Europe" is not only a promise of quality for us, but also stands for good working conditions, equal opportunities, sustainability and corporate responsibility.