Protector Forest 2.0 red-yellow

€359.90
* Prices incl. VAT, excl. shipping costs.
603114
603114
HAIX
The PROTECTOR FOREST 2.0 is a comfortable and safe cut protection shoe for forest workers, foresters and hunters. The PROTECTOR FOREST 2.0 combines safety and comfort during tree felling in the forest. The boot has a class 2 cut protection and prevents chainsaw cuts up to a chain speed of 24 m/s from injuring the foot. Upper material The upper material consists of high-quality, hydrophobic nubuck leather with a thickness of 2.8 - 3.0 mm. The design in the signal colours red and yellow ensures good visibility in all weather conditions. Inner material A GORE-TEX membrane makes the shoe absolutely waterproof and breathable at the same time. A highly abrasion-resistant lining with fleece interlayer ensures optimum climate comfort in all seasons and under the most demanding conditions. Increased chemical protection. Plastic/fleece insole The moisture-absorbing plastic/fleece insole is dimensionally stable and torsion-resistant. It reduces punctual pressure, e.g. from stones. Sole The sturdy and abrasion resistant VIBRAM rubber/PU sole has a robust off-road tread pattern for safe foothold in rough terrain. The lightweight PU cushioning wedge provides shock absorption and good rolling comfort. The outsole is heat and fuel resistant and non-chalking. According to EN ISO 20345:2011. Insole The insole is comfortable, cushioning and moisture wicking. A separate heel cup provides good cushioning and foot guidance. Cut protection The shoe has cut protection level 2 (24 m/sec), according to EN ISO 17249:2013. HAIX® Protective Cap The wide, anatomically shaped and padded toe cap ensures safety and comfort. HAIX® 2-Zone Lacing The two-zone lacing system allows separate adjustment of the shoe to the foot and upper area for optimum support. HAIX® Climate System The HAIX® Climate System uses the pumping movement during walking to transport moisture to the ventilation openings on the shoe’s shaft and tongue. Additional features Lacing system with smooth running lacing elements, no side seams, edge-stable sole, tip and heel protection made of rubber for a longer life, continuous rubber edge strip for stabilization and protection against stones, spikes, etc.

Protector Forest 2.0 red-yellow

(0)

All-round Protection for your feet: your Protector Forest 2.0 cut Protection boot.

OutOfStock
€359.90 *
Cut protection class 2

* Prices incl. VAT, excl. shipping costs.

is no longer offered Unfortunately we no longer produce this article
successor


Art.: 603114
  • Cut protection class 2 Cut protection class 2
  • Durably waterproof Durably waterproof
  • Steel protective cap Steel protective cap
  • Relieving damping Relieving damping
  • Resolable Resolable
  • Made in Europe Made in Europe

Maximum safety when working in the precinct

Your Protector Forest 2.0 cut protection boot with cut protection class offers you ideal protection for forest and forestry work.

Certified cut protection level 2

Your Protector Forest 2.0 red-yellow meets the cut protection class Level 2. This means your feet are safe from chainsaw cuts at a running speed of up to 24m/s.

Shockproof thanks to Protective steel toe cap

The integrity of your feet is essential. The Protector Forest 2.0 red-yellow therefore features a protective cap made of shock-resistant steel. The Protective steel toe cap is anatomically shaped and meets the highest safety requirements.

Extra slip-resistant with VIBRAM

You'll stand securely in the Protector Forest 2.0 red-yellow as it smooths your path on rough terrain. The sole of the Protector Forest 2.0 red-yellow has an optimal rubber compound and is therefore particularly slip-resistant, stable and stiff. This is the VIBRAM effect incorporated into the sole of the Protector Forest 2.0 red-yellow.

Special comfort even on long days

Your Protector Forest 2.0 ensures a pleasant foot climate and optimum comfort thanks to its soft and breathable leather lining.

Waterproof thanks to GORE-TEX®

Your feet stay dry and you stay healthy because the Protector Forest 2.0 red-yellow is permanently waterproof and extremely breathable. This is ensured by the three-layer GORE-TEX® membrane throughout the lining of the Protector Forest 2.0 red-yellow.

Relieving cushioning with HAIX absorption

You'll experience a comfortable feel in the Protector Forest 2.0 red-yellow even when you're out for several hours. Because the integrated cushioning wedge inside cushions your steps. We call this HAIX Absorption: for drive even on long working days.

Optimal hold thanks to 2-zone lacing

The Protector Forest 2.0 red-yellow adapts perfectly to your foot in both the instep and the shaft area, so that it offers you optimal support. This is ensured by 2-Zone Lacing, an innovative 2-zone lacing system for foot and upper.

Precise fit thanks to special lasts

The right shoe for your feet. Thanks to specially designed lasts, your Protector Forest 2.0 red-yellow fits perfectly and provides ultimate wearing comfort, the whole day long.

The hard facts

HAIX Protector Forest 2.0 red-yellow

Article no. 603114

Protective cap
certified for orthopedic insoles
GORE-TEX®
Relieving damping
Resolable
Cut protection level 2
Certification:
CE EN ISO 20345:2011 SB E HRO HI CI WR WRU FO SRC
Colour:
red/yellow
Height in cm:
22,0 cm
Upper material:
Suede leather
Cut protection class:
class 2
Safety classification:
SB
Fastener:
2 zone lacing
Waterproof:
waterproof through Gore-Tex
Weight per shoe:
1177g
Leather thickness:
2,8 - 3,0
KWF Certificate:
KWF-PROFI

Your questions,
our honest answers

Different insoles are available for Protector Forest 2.0 red-yellow to increase or reduce the volume in the shoe. For this purpose, we have developed a slightly thicker insole for narrow feet and a slightly thinner insole for wider feet.

Our Vario-Wide-Fit-System allows you to adjust the volume in the shoe.

The rubber edge strip of the Protector Forest 2.0 red-yellow provides stability and protects against spikes or stones. It therefore prevents unpleasant pressure points on the foot.

The shoes can be used for all hiking or hunting activities without annoying restrictions.

The Protector Forest 2.0 red-yellow is equipped with a cut protection. This means that you can safely work with chain saws that have a running speed of 24 m per second.

Focus one hundred percent on your job thanks to complete protection of the Protector Forest 2.0 red-yellow.

Unlike the Nature Trace, the Protector Forest 2.0 is equipped with cut protection. Thus, this is also suitable for work with chainsaws.

The Protector Forest 2.0 combines comfort with safety.

Thanks to the two-zone lacing of the Protector Forest 2.0 red-yellow, the lacing can be quickly fixed and the shoe can be optimally adjusted to the foot. The lacing is first adjusted and fixed in the instep area and can then be variably adjusted in the shaft area. This combination provides support and stability.

The Protector Forest 2.0 red-yellow can be put on and taken off quickly and easily, so that the focus can be fully on the work.

You can find all the right spare parts for our shoes on our spare parts page.

We produce in a UK shoe size system. The distance between our half UK sizes is only a few millimetres. This makes it more likely to find exactly the right shoe length.

Half UK sizes differ in length by only a few millimetres.

You can simply wash the dirty shoes with water and a brush. Please do not dry the wet shoes (even if they are wet on the inside) on an open fire, a hot stove or a heater. This will change the shape of the shoe. Simply remove the footbed and stuff the shoes with newspaper or use a shoe tree. Then allow the shoes to air dry slowly. We recommend washing the footbed regularly at 30°. In general, it is best to remove the footbed from the shoes after every wear to ensure optimal re-drying.

Simply clean it with a brush and water and let it air dry.

From experience, the Protector Forest 2.0 red-yellow is a normal size. We therefore recommend that you choose the usual size.

Experience has shown that the shoe fits normally.

HAIX shoes are 100% Made in Europe. For us, this is not just lip service, but lived practice. When it says "Made in Europe" on a HAIX shoe, we assure you that it was made exclusively at our production sites in Mainburg and Mala Subotica, Croatia. Both plants are among the most modern shoe manufacturing facilities in the world.

By the way: "Made in Europe" is not only a promise of quality for us, but also stands for good working conditions, equal opportunities, sustainability and corporate responsibility.

What other customers are saying

0 Customer reviews

Also available in other versions for you

Write an evaluation
Defective Sufficient Satisfactory Good Very Good
way too small
too small
suitable
too large
way too large

The fields marked with * are required.

We are
100 Percent
Made in Europe
Learn more
VERSANDKOSTENFREI MIT DEM CODE: hxship241