Different insoles are available for Fire Eagle 2.0 to increase or reduce the volume in the shoe. For this purpose, we have developed a slightly thicker insole for narrow feet and a slightly thinner insole for wider feet.

Our Vario-Wide-Fit-System allows you to adjust the volume in the shoe.

The Fire Eagle 2.0 has been tested according to the standard DGUV 112-191 (BGR 191) and is therefore approved for orthopaedic insoles.

This allows the Fire Eagle 2.0 to be adapted even more optimally to the foot and to support its anatomical structure.

The Fire Eagle meets all requirements of the S3 classification. The puncture-resistant sole and toe cap protect against external influences. However, as the shoe is certified according to the fire brigade standard DIN EN 15090, it cannot be designated as an S3 shoe.

The Fire Eagle meets the requirements, but is not S3 certified due to the fire brigade standard.

The Fire Eagle 2.0 can be cared for quickly and easily. With black shoe polish, which does not impair the breathability of the leather, and a waterproofing agent, the shoe is ready for any weather. For this model, we especially recommend our black shoe polish, which contains Sun Reflect pigments. This minimises the heating of the shoe by 20%.

The uncomplicated care of the Fire Eagle 2.0 ensures long-lasting enjoyment of the shoe's quality.

Thanks to Gore Crosstech, the Fire Eagle 2.0 is not only waterproof, but also protects against the entry of blood and body fluids.

The Fire Eagle 2.0 can be used in any work without any restriction.

The practical RFID pocket of the Fire Eagle 2.0 offers space for an RFID chip. This makes it easier for you to manage your personal protective equipment.

You can fully focus on your mission with the Fire Eagle 2.0.

With the new RapidFit lacing system you are ready for action in an instant, because with just one move you can adjust the boot to fit you perfectly. In addition, the FIRE EAGLE 2.0 has an RFID pocket, an even tougher overcap to prevent wear in the toe area, and an instep protector with a smooth surface for easy cleaning.

The FIRE EAGLE 2.0 offers even more comfort and safety than its predecessor.

The Fire Eagle 2.0 can be used both indoors and outdoors. Certified according to the fire brigade standard DIN EN 15090, the Fire Eagle 2.0 meets the highest safety requirements for fire fighting.

For all those who work indoors and outdoors under challenging conditions.

You can find all the right spare parts for our shoes on our spare parts page.

We produce in a UK shoe size system. The distance between our half UK sizes is only a few millimetres. This makes it more likely to find exactly the right shoe length.

Half UK sizes differ in length by only a few millimetres.

You can simply wash the dirty shoes with water and a brush. Please do not dry the wet shoes (even if they are wet on the inside) on an open fire, a hot stove or a heater. This will change the shape of the shoe. Simply remove the footbed and stuff the shoes with newspaper or use a shoe tree. Then allow the shoes to air dry slowly. We recommend washing the footbed regularly at 30°. In general, it is best to remove the footbed from the shoes after every wear to ensure optimal re-drying.

Simply clean it with a brush and water and let it air dry.

From experience, the Fire Eagle 2.0 is a normal size. We therefore recommend that you choose the usual size.

Experience has shown that the shoe fits normally.

HAIX shoes are 100% Made in Europe. For us, this is not just lip service, but lived practice. When it says "Made in Europe" on a HAIX shoe, we assure you that it was made exclusively at our production sites in Mainburg and Mala Subotica, Croatia. Both plants are among the most modern shoe manufacturing facilities in the world.

By the way: "Made in Europe" is not only a promise of quality for us, but also stands for good working conditions, equal opportunities, sustainability and corporate responsibility.