- Safety class S3
- Durably waterproof
- Robust and safe thanks to outer leather
- Stabilising thanks to AS system
- Made in Europe
Maximum safety due to safety class S3
Your health is important. The Airpower XR3 offers all-round protection for your foot, as it is puncture-resistant, waterproof, slip-resistant and shock-resistant. This is ensured by the high demands of the highest safety class S3.
Robust and safe thanks to outer leather
The extreme robustness of the Airpower XR3 ensure your feet remain unscathed in the rough-and-tumble of everyday work. This is ensured by the resistant outer leather that cannot be damaged by pointed objects or sharp edges.
Puncture-resistant thanks to protective sole (steel)
With your Airpower XR3 you can walk safely over hill and dale, because the integrated steel sole offers even safer protection against sharp objects than textile soles.
Impact resistant thanks to composite toe cap
The integrity of your feet is essential. The Airpower XR3 is therefore equipped with a composite toe cap. The anatomically shaped, lightweight plastic protective cap meets the highest safety requirements, because it immediately returns to its original shape after impact and thus quickly releases the toes.
Waterproof thanks to GORE-TEX®
Your feet stay dry and you stay healthy because the Airpower XR3 is permanently waterproof and extremely breathable. This is ensured by the three-layer GORE-TEX® membrane throughout the lining of the Airpower XR3.
Midfoot support thanks to Arch Support System
The Airpower XR3 gives you a strong foothold throughout the workday, because the natural shape of the foot is supported by anatomically shaped lasts in the joint area. This is how the Arch Support System stabilizes your entire physique.
Blister-free thanks to Flex Protection System
In the Airpower XR3 you are safe from blisters, because a leather reinforcement in the heel bend protects against friction. This is what we call the Flex Protection System, which keeps your heels intact.
Precise fit thanks to special lasts
The right shoe for your feet. Thanks to specially designed lasts, your Airpower XR3 fits perfectly and provides ultimate wearing comfort, the whole day long.
Different insoles are available for Airpower XR3 to increase or reduce the volume in the shoe. For this purpose, we have developed a slightly thicker insole for narrow feet and a slightly thinner insole for wider feet.
Our Vario-Wide-Fit-System allows you to adjust the volume in the shoe.
The Airpower XR3 has been tested according to the standard DGUV 112-191 (BGR 191) and is therefore approved for orthopaedic insoles.
This allows the Airpower XR3 to be adapted even more optimally to the foot and to support its anatomical structure.
Airpower XR3 are all-season shoes that can be worn in summer or winter. The shoe is breathable and waterproof thanks to the GORE-TEX® membrane and with the help of our Sun Reflect System, it turns away the sunlight so that heating can be minimized.
The Airpower XR3 defies both colder and warmer temperatures.
The slightly higher cut shaft of the Airpower XR3 provides sufficient support. The leather reinforcement of the heel flex, which protects this flexible and soft insert of the flex zone from friction, provides stability.
The Airpower XR3 holds where it is supposed to hold and ensures smooth working due to its stability.
You can find all the right spare parts for our shoes on our spare parts page.
We produce in a UK shoe size system. The distance between our half UK sizes is only a few millimetres. This makes it more likely to find exactly the right shoe length.
Half UK sizes differ in length by only a few millimetres.
You can simply wash the dirty shoes with water and a brush. Please do not dry the wet shoes (even if they are wet on the inside) on an open fire, a hot stove or a heater. This will change the shape of the shoe. Simply remove the footbed and stuff the shoes with newspaper or use a shoe tree. Then allow the shoes to air dry slowly. We recommend washing the footbed regularly at 30°. In general, it is best to remove the footbed from the shoes after every wear to ensure optimal re-drying.
Simply clean it with a brush and water and let it air dry.
From experience, the Airpower XR3 is a normal size. We therefore recommend that you choose the usual size.
Experience has shown that the shoe fits normally.
The Airpower XR3 is a classic for all those whose main focus is on quality and the safety it brings. The sturdy, thick bull leather provides the necessary robustness, so that the shoe is suitable for people who work in challenging conditions.
Particularly popular with roofers, carpenters and construction workers.
HAIX shoes are 100% Made in Europe. For us, this is not just lip service, but lived practice. When it says "Made in Europe" on a HAIX shoe, we assure you that it was made exclusively at our production sites in Mainburg and Mala Subotica, Croatia. Both plants are among the most modern shoe manufacturing facilities in the world.
By the way: "Made in Europe" is not only a promise of quality for us, but also stands for good working conditions, equal opportunities, sustainability and corporate responsibility.